Elvie Stride Connect Kit Double vs. Stride Cups: What to Buy
By Smarter technology for women | Elvie Trainer and Elvie Pump | Published: 2026-11-04
Category: أدلة الشراء
Decide between the Elvie Stride Connect Kit (Double) and Stride Cups (2 pack) with clear rules on when each replacement part solves your pumping problem.
Quick answer
Buy the Elvie Stride Connect Kit (Double) if your pump is not building suction or you need the tubing and caps to pump single or double. Buy the Elvie Stride Cups (2 pack) if your current cups are worn, damaged, or you want a spare set for in-bra collection. They solve different problems, so check which part is actually failing before you order.
Why these two parts are not interchangeable
The Connect Kit is the suction pathway: short tubes, a long tube, a splitter, and caps. Without it, the pump cannot pull vacuum. The Cups are the collection vessels that sit in your bra and hold milk. A worn cup can leak or lose shape; a damaged tube can stop suction entirely. Matching the part to the symptom avoids buying both when only one is needed.
The compatibility limit that matters most
Both products are for use exclusively with Elvie Stride, and neither is compatible with Elvie Stride 2. If you own Stride 2, these parts will not fit, and you should contact customer care for the correct accessories. This is the single most important check before ordering, because the product names look similar but the generations do not mix.
When a double kit is overkill
If you only pump one side at a time, you still need the Connect Kit to create suction, but you may not need to replace every tube at once. Inspect each piece: a split or loose short tube is the usual culprit for weak suction, while the long tube and splitter often last longer. Replacing the whole kit is simpler, but it is not always necessary.
Decision rules for your next order
- Suction has dropped or stopped: Check the short tubes and caps first. If any are split, loose, or misshapen, order the Elvie Stride Connect Kit (Double) to restore the vacuum path. A suction failure points to the Connect Kit, not the Cups.
- Milk is leaking or cups feel worn: Inspect the cups for cracks, cloudiness, or a loose seal. If the cup itself is the problem, order the Elvie Stride Cups (2 pack). Leaks and worn cups point to the Cups, not the tubing.
- You pump on both sides regularly: Keep a spare Connect Kit and an extra set of Cups so a single damaged part does not interrupt a session. The double kit supports single or double setup. Spares are a practical choice for frequent double pumpers.
- You own Elvie Stride 2: Do not order either product. They are not compatible with Stride 2; contact customer care for the correct accessories. Confirm your pump generation before checkout.
Product facts at a glance
- Elvie Stride Connect Kit (Double): Includes 2 short tubes, 1 long tube, 1 tube splitter, and 2 caps, and is used to enable suction and set up single or double pumping. This is the part to buy when suction is the problem, not milk collection.
Elvie Stride Connect Kit (Double) - Elvie Stride Cups (2 pack): Each cup holds up to 150 ml/5 oz and is poured into your storage container by removing the cup. A spare set lets you keep pumping while one set is being cleaned, and the 5 oz capacity tells you when to empty.
Elvie Stride Cups (2 pack)
Who each part suits
Best for
- Elvie Stride owners whose suction has weakened or who need to set up single or double pumping
- Elvie Stride owners who want a spare set of in-bra cups for collection and cleaning rotation
Not for
- Anyone using Elvie Stride 2, because these accessories are not compatible
- Pumpers who have not checked which part is actually worn or damaged
